 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Unit Recommendations LawnBott Professional - Can get through narrow spaces Up to 5/8 Acre LawnBott Evolution - Also good for narrow spaces Up to 3/4 Acre Lawnbott Super Evolution (base unit plus extra battery) Up to 1 1/4 Acres LawnBott LB3510 - Newest on the Market Over 3/4 of an Acre LawnBott Super LB3510 (base unit plus two extra batteries) Up to 1 1/2 Acres Greenmow 1 Up to 5/8 Acre GreenMow 2 Up to 1 1/4 Acres ParcMow Up to 2 1/2 Acres BigMow Up to 5 Acres Please call if you decided to use multiple units so they can be properly coded. |
| GreenMow 1 Sale Price 5,799 |
| GreenMow 2 Sale Price 7,369 |
| The Greenmow® robot mower works consistently on the principle of "mulching": the blades of grass reduced to fine particles decompose on the ground, making it more fertile. The random function ensures that each square metre of ground is mowed least 3 times, irrespective of the shape of area to be mowed. Battery run, the Greenmow® works at a speed of 1.3 mph. Its on-board sonar detects obstacles of a minimum height of 15 in, it slows down, and, according to the angle of approach, manoeuvres to set off in another direction. The 2 ( or 1 ) "floating" cutting heads of the Greenmow® (width: 17.5 in or 8.75 in) give results which are very close to those of the cylinder mower. The polythene bodywork is mounted on an aluminium chassis. Its lightness and technological solutions mean that the Greenmow® leaves no marks on the grass. Technical specification Performance Working speed 1.3 mph on level open ground, its speed reducing to .4 mph when its sonar detects an obstacle higher than 15 in. Cutting height .9 in - 2.9 in Cutting width 17.5 in(or 8.75 in) Slope Maximum slope of 30% Power 1 NiCd 24 volts - 5 Ah capacity battery "packs" Consumption 475 kWh per year - according to the area being mown Dimensions Width : 31 in - Lenght : 25 in - Height: 14 in Weight 57 lbs. Systems Safety Combined operation of sonar, a touch sensitive bumper and backwards movement sensors enable it to cope with all types of obstacle (mobile or stationary) Movement Stop and reversal of direction of travel on encountering an obstacle Propulsion 10 in diameter driving wheels with non-slip tyres driven by a 24 volt DC brushless motor Steering Direction controlled by wheel speed difference Cutting system 2 (or 1) floating cutting heads each fitted with retractable blades driven by a 24 volt brushless motor at a speed of 3,500 rpm. Self-cleaning system by expulsion of clippings via a centrifugal effect. Bodywork Green-dyed polyethylene Charging station Equipped with a 30 volts AC charger and a signal light to indicate malfunction, it provides the very low voltage (50 milliamps) required for the boundary wire. It should be connected to a standard power source (220 or 110 volts) by a 1.5 mm2 mains wire and protected by a residual current device according to standards in use. |
| The Robo Store, Inc. (612)310-9994 |
| Zippit is a subsidiary of: The Robo Store Inc. Do you use a CPAP? If so our other product is a Zippit Cover for your CPAP hose. Click here to go to Zippitcovers.com |
copyright The Robo Store Inc 2012